RED has recently rolled out a new firmware update for its V-RAPTOR and KOMODO-X cameras. Among many changes, firmware 2.2.4 improves boot times for both models and reduces power consumption for the V-RAPTOR platform. The update is now available for free download.
While we haven’t really seen any new cameras from RED following the acquisition by Nikon – except for Z mount variants of V-RAPTOR [X] and KOMODO-X and the V-RAPTOR XE, which is essentially a stripped-down version of the flagship V-RAPTOR [X] – firmware 2.2.4 aims at strengthening the capabilities of the DSMC3 lineup via a series of performance and stability improvements. Let’s take a closer look!
Firmware 2.2.4 for RED V-RAPTOR and KOMODO-X
RED cameras have always been notoriously slow upon starting up, and the latest DSMC3 models are no exception. Firmware 2.2.4 brings a significant improvement in this regard by reducing boot time by approximately 40% compared to the previous firmware. I ran a quick test on my KOMODO-X, and the camera is now up and running in about 19 seconds.
![RED V-RAPTOR [X] and KOMODO-X with Nikon Z mount](https://www.cined.com/content/uploads/2026/05/RED-V-RAPTOR-KOMODO-X-Firmware-2.2.4-Z-mount-900x506.jpeg)
On top of this, the new firmware reduces the power draw of V-RAPTOR cameras, making them less power-hungry by up to 5W. This may seem like a marginal improvement, but it can actually make a difference in battery life during a long shooting day.

Other relevant improvements include the ability to use the touchscreen of the RED DSMC3 monitor to smoothly adjust the intensity of the filter inside RED’s PL Electronic ND Adapter, an improved focus peaking algorithm, and support for industry-standard test pattern output over SDI for on-set display alignment and calibration checks.
Improvements for live and virtual production
During live productions, support for External Tally trigger has been added, so the camera can start and stop recording full-resolution footage to the CFexpress card only for the time it’s on air, while continuously providing an SDI signal to the video switcher.
![RED V-RAPTOR XL [X] in a broadcast configuration](https://www.cined.com/content/uploads/2026/05/RED-V-RAPTOR-KOMODO-X-Firmware-2.2.4-Broadcast-900x506.jpeg)
For virtual production with the V-RAPTOR [X] and XL [X], it’s now possible to set independent shutter angles for the camera-ready VFX and the green screen stream when using the Phantom Track feature.
![Discrete Phantom Track feature on RED V-RAPTOR XL [X]](https://www.cined.com/content/uploads/2026/05/RED-V-RAPTOR-KOMODO-X-Firmware-2.2.4-Discrete-Phantom-Track-900x506.jpeg)
RED V-RAPTOR Firmware 2.2.4 – Release Notes
Reduced:
- Boot time
- Power consumption
Added:
- Support for Broadcast R3D in RED Connect
- Support for Phantom Track in RED Connect
- Discrete Phantom Track control
- New Sensor Sync Shift interface
- Support for timecode triggered recording
- External Tally Recording system
- Test Patterns to R3D Project Format
- User Buttons Video Overlays
- ND Iris Tracking
- Angelbird Media Updater (RD4.30)
- Angelbird V4 updater (RD5.04)
- SDI Signal Range control in Broadcast R3D Playback
- SmallHD RED Touch OS 6.1.2
- Exascend Essential Pro Max 1TB/2TB support
- Nextorage B2 Pro+ 660GB/1330GB support
Fixed:
- Inconsistent max Broadcast Gain
- 2nd Zebra with SDI 2
Changed:
- Serial Protocol “Network (PPP)” to “Network RCP2 (PPP)”
Improved:
- GIG-E and REDConnect network stability
- XL network stability
- Broadcast Lens communication
- Sensor sync adjustment timing
- Continuously variable ND live preview
- High ISO ProRes recordings and live preview
- Broadcast R3D Detail parameter
- Peaking performance
- Network stability
RED KOMODO-X Firmware 2.2.4 – Release Notes
Reduced:
- Boot time
Added:
- Angelbird Media Updater (RD4.30 &
- Support for timecode triggered recording
- New Sensor Sync Shift interface
- External Tally Recording system
- Test Pattern support
- User Buttons Video Overlays
- ND Iris Tracking
- Exascend Essential Pro Max 1TB/2TB support
- Nextorage B2 Pro+ 660GB/1330GB support
- SmalIHD RED Touch OS 6.1.2 firmware (SmallHD OS 6.1)
Changed:
Serial Protocol “Network (PPP)” to “Network RCP2 (PPP)”
Improved:
- Sensor sync adjustment timing
- Continuously variable ND live preview
- High ISO ProRes recordings and live preview
- Peaking performance
- Network stability
- Broadcast Lens communication
Price and availability
The new 2.2.4 firmware for RED V-RAPTOR and KOMODO-X is now available to download from the manufacturer’s website. The update is free of charge.
For more information, please visit RED’s website here.
What do you think of these improvements? What features would you like to see added to the V-RAPTOR and KOMODO-X? Let us know your thoughts in the comment section below!


0 Comments